Turbine Oil Conditioners

Model KL1 TURBO-TOC® Lube Oil Conditioner for Small Reservoirs

• Solid contamination and water removal in one very compact design (22"L x 12"W x 32"H)
• 1gpm continuous process rate for fast reservoir turn over and generous reserve for emergencies
• Suitable for reservoir capacities to 120 gallons
• Extremely compact design mounts directly on or adjacent to reservoir
• Removal of particulate smaller than bearing clearances with absolute rated filter elements
• 80% single pass water removal
• Low maintenance, operator not required
• Light weight, less than 65 pounds dry
• Very low operating cost
• Simple installation  

BEFORE DIRTY/WET OIL

AFTER CLEAN/DRY OIL

What Does Your Turbine Oil Look Like? CLICK HERE TO SEE HOW WE DO IT BETTER

The flagship of the Kaydon Power Generation Product Line, this unit has become the turbine oil conditioning standard by which all others are judged. It combines particulate and water removal in one skid-mounted, completely automatic system with a 100gpm process rate. Thanks to the patented (patent # 4,892,667) water removal technique and high quality particulate filters, guarantees of 150ppm of total water and an ISO 16/13 particulate level are realistic. Each unit comes with a standard three year warranty and one free day of startup training.

Model KLM60H TURBO-TOC® System

The Model KLM60H TURBO-TOC® is a 60 gpm off-line pressure/coalescence turbine oil conditioning system that continuously draws oil from the turbine reservoir, cleans and dries the oil, and pumps the oil back to oil reservoir.

The TURBO-TOC® is a self-contained, skid mounted, micro-processor controlled, touch screen operated, pressure/coalescence turbine oil conditioning system for the removal of free and emulsified water and to a filtration rate of ß3 > 200 {ß5(c) = 1000}(tested per ISO 16889).

Benefits of using the KLM60H TURBO-TOC System:

• Cleaner Turbine Oil
• Reduced Bearing Failures
• Fewer Forced Outages
• Easy to Operate

These units are designed similarly to the KT100AH with the same superior performance, but with lower flow rates - 30gpm and 10gpm. The KL series are ideal for medium and small steam turbines, boiler feed pump turbines, and forced draft fan drives.

• Flow rates to 55gpm
• Removes free water
• Particulate removal to 2.8 micron absolute
• Heavy duty circulating pump with internal relief valve and TEFC electric motor
• Corrosion protective coating-Heresite®
• Level gauges for each compartment
• Filter bag change gauge
• Complete set of filter elements (2.8 micron beta absolute) and filter bags
• Flanged inlet and outlet ports
• Drain valves for each compartment
• Filter bypass safety valve
• Polishing filter element change-out gauges
• Intake air filter
• Vapor extractor
• Counter balance water leg type water extractor
• Polishing filter - ASME code labeled and stamped per section VIII
• Used to filter turbine oil since 1939