Pulp & Paper Filtration

FilterDyne Vacuum Distillation - DYNA-VAC™
Oil Purification System
858-600-804 600gph Oil Processing Rate

Vacuum Distillation System to Purify & Remove Water from all Oils

• Dyna-Glass II Filter Elements to 3 micron Beta200
• Removes Water
  All water... Free, Emulsified and Dissolved to less than 70ppm
• Removes Gases

Dyna-Vac’s can be used safely to remove water, gases and particulate matter from:

• Lubricating Oils
• Hydraulic Oils
• Mineral or Synthetic Oils

Model shown is 858-600-804 with inlet and outlet filters for removing 99.5% of all particulates as small as 3 microns. The vacuum distillation process is capable of removing water at over 6 gallons per hour. Oil can be dried to less than 70ppm in 7-10 passes.

The 858-600-804 Dyna-Vac is an oil purification system used to remove water and solid contamination from oil reservoirs. It can be used on hydraulic, lubricating, and silicone dielectric oils. It features a highly engineered vacuum distillation chamber for more efficient water removal than vacuum dehydration systems. The Dyna-Vac employs automatic foam control, prefilter, postfilter using Beta200 rated filter elements.

Highest water removal rate available
The removal of water is accomplished in the exclusive Dyna-Dry
process chamber. Very high water removal rates are obtained
because of condensing coils. The condensing chamber also prevents re-contaminating the oil with water.

Durability
FilterDyne uses liquid ring pumps to create the vacuum condition for distilling the water. These type pumps are designed to pump vapors and liquids without damage.

FilterDyne’s 858-600-804 Dyna-Vac removes water from oil by vacuum distillation. Water is separated from oil at rates up to 6 gallons/hour. Oil properties are not altered in this process.

Options

575 VAC, 60Hz • 415VAC, 50Hz • 400VAC, 50Hz • 380VAC, 50Hz
Dyna-Save™ Water Cooling System - Minimizes the need for continuous cooling water. Increase length by 26"
Explosion Proof Design - Class I, Div. II, Group C-D
Viton Service Package - Phosphate Ester or Ammonia service, copper-free construction
Upgrade to ISO 680 oil service - Includes 2" hose and high capacity feed pump
NEMA 4x Service*
Stainless Steel Electrical Enclosure
Cast Iron Motors
Inlet Shut-Off Valve - Solenoid-Operated
Export Packaging

*NEMA 4X enclosures are intended for indoor & outdoor use primarily to provide a degree of protection against corrosion, windblown dust & rain, splashing water, and hose-directed water; and to be undamaged by the formation of ice.

Standard Model Includes: 480VAC, 3 Phase, 60HZ, 57Amp
• Dyna-Dry™ - Exclusive vacuum process	Model 858-600-807JA97 600 GPH(10-gpm)
• Liquid Ring Vacuum Pump: 15cfm
• Purification Flow Rate: 600 gph
• Heater Power: 37.5KW (23 watts/sq. ft.)
• Feed Pump Motor: 1.5HP, TEFC
• Vacuum Pump Motor: 2.5HP, TEFC
• Discharge Pump Motor: 2HP, TEFC
• Weight: 2100 lbs.
• Dimensions: 60"L x 38"W x 79"H
• Suction Hose: 10ft. with 1.5" female cam lock
• Discharge Hose: 10ft. with 1" male cam lock
• Pre-Filter Element: 6µ (ß6 = 200)
• Pre-Filter Vessel: Carbon Steel with P gauge
• Post-Filter Element: 3µ (ß3 = 200)
• Post-Filter Vessel: Carbon Steel with P gauge
• Buna-N Seals
• ISO 320 Maximum Viscosity (mineral oil only)
• Portable with 6" wheels
• NEMA 12 Control Panel