Hydroelectric Turbine Lube Oil Conditioning

Model KL1
Lube Oil Conditioner for Shaft Bearing Turbine Oil Reservoirs

• Solid contamination and water removal in one very compact design (22"L x 12"W x 32"H)
• 1 gpm continuous process rate
• Ideal for hydroelectrical turbine/generation shaft bearing turbine lube oil reservoirs that are 240 gallons and less
• Extremely compact design mounts directly on or adjacent to reservoir
• Removal of particulate smaller than bearing clearances with absolute rated filter elements
• 80% single pass water removal
• Low maintenance, operator not required
• Light weight, less than 65 pounds dry
• Very low operating cost
• Simple installation

• Solid contamination and water removal in one very compact design (22"L x 12"W x 32"H)
• 1 gpm continuous process rate
• Ideal for hydroelectrical turbine/generation shaft bearing turbine lube oil reservoirs that are 240 gallons and less
• Extremely compact design mounts directly on or adjacent to reservoir
• Removal of particulate smaller than bearing clearances with absolute rated filter elements
• 80% single pass water removal
• Low maintenance, operator not required
• Light weight, less than 65 pounds dry
• Very low operating cost
• Simple installation

• Removal of particulate smaller than bearing & valve clearances with ANSI(NFPA) Absolute rated filter elements (KM6036-05)
• Second filter vessel for additional filtration (KQ06036-5)
• Optional heater
• Optional portability kit that includes casters, hoses and extension cord

• Longer Oil Life
• Reduced Oil-Related Equipment Failures
• Fewer Shutdowns
• Reduced Sludge and Pipe Scale Formation
• Less Costly Rebuilds

Dyna-Vac 858-600
Vacuum Distillation Systems for Water Removal From Lubricating Oil in Hydroelectric Plants

The most effective systems to remove water from oil.
All 858 Dyna-Vacs use vacuum distillation to distill water out of oil. 858 Dyna-Vacs available in flow rates up to 600 gph. Obtain oil dryness levels of 70 ppm with 858 Dyna-Vacs.

• Removes Solids - Dyna-Glass II Filter Elements to 3 micron Beta200
• Removes Water - All water... Free, Emulsified and Dissolved to less than 70ppm
• Removes Gases

Dyna-Vac’s can be used safely to remove water, gases and particulate matter from:

• Lubricating Oils
• Hydraulic Oils
• Mineral or Synthetic Oils